Speaker 1
Hi, I need help getting a Wi-Fi extender to a new Spectrum router that I just had. I had a Linksys router before with a Linksys Wi-Fi extender. The Linksys router just was outdid it's - outdid it's life and wasn't getting the speeds I needed. So I went and got a Spectrum router and um I still have this extender that goes out to my garage and I cannot seem to get it connected.
00:00
Speaker 2
welcome to Linksys support. To ensure quality service, your call may be monitored. Certain products will be supported, while End of Support products will have self-help options available. Please have your serial number ready, and stay on the line for assistance. While waiting, you may also visit support.linksys.com for more information about your product. Thank you for calling Mr. This is Ice. How can I help you?
00:00
Speaker 1
zero. [silence] The number is [silence] zero [silence] D1-0M as in Mary [silence] two [silence] eight. C as in Charlie, one six, two, eight, four. Correct. Yes.
01:00
Speaker 2
All right, I'm sorry to hear about that, sir. May I have the serial number of your range extender? I'll repeat again. The serial number is, for, David David, 10m for Mike, 28c for Charlie, 116 284. Is that correct? So, this Networks product you have is model MX20.
01:00
Speaker 1
Yes. Yes, this is the extender that I would like to connect. did I would like to connect back? Yes, to my uh, spectrum router. So, I've reset uh, just going ahead. Send me a second. Yes. Yes. No, it is a router. It has a Wi-Fi and everything so I have my Wi-Fi, I'm connected the
02:00
Speaker 2
M S. And this is the one, uh, you want to add or connect to your your router. So your spectrum. Uh, I wanna know if your spectrum is, uh, you mentioned it's a spectrum, right? So, uh, this spectrum router, uh, also broadcasts a wifi name of its own or it's just a modem.
02:00
Speaker 1
Okay, now, if I'm talking to you and then I reset this link, this one, and I have the setup name, but when I go to the app, it's wanting me to set up a brand new router, like it's a like this is the main router, and I'm just trying to add, of course, an extender. So I have the Velop S505 as a Wi-Fi I can connect to on my phone. However, when I connect to it, of course, it doesn't have internet and I cannot seem to get it to find on the Blin this app to be able to, you know, add uh, you know, add something to it. It's just wanting me to set up a brand new system.
03:00
Speaker 2
so you tried to set it up are using the links is up and, uh it didn't work. All right, um, may I just confirm first if your name is Cory.
03:00
Speaker 1
Oh yeah, yeah, purple, purple, happen things just the switches up, it's just called Lanka's gonna go in and disconnect all the bridges.
04:00
Speaker 2
All right. Let's first start with checking on the color of your MX20. [silence] So, to set up set that MX20 router of yours, Lynx router, for we need to have a solid blue light for it to be connected and online. So, uh what was the Lynx app mentioned when you try to set it up? Yes, Lynx. So, when you, uh, open [silence]
04:00
Speaker 1
is trying to get me to log it says manage your wifi or set up a new wifi network. You want me to say set up a new wifi? okay now it's saying disconnect and remove your old system okay now it wants me to plug in your router near the source of internet yep did that but now here's the problem it wants me to connect my router to the modem use an ethernet cable to connect the yellow Internet port on your router the power sky on your modem and the power cable to a wall outlet turn the power on all devices
05:00
Speaker 2
All right, let's first, set up a new wifi or. All right, try to select set up a new wifi. Yes, because you haven't yet connected that MX 20. If your MX 20 is already set up, then you will select manage your wifi. But since that MX 20 router you have is still not set up, so you have to select set up a new wifi. And what does
05:00
Speaker 1
Modem of source of internet. It's it's it's but I'm not connecting I'm not connecting it to the modem. This is not my router. This is an extender. This this this is not my main source of internet. I have a modem. I have a router through Spectrum. This is an extender that's all it is. This is not my new router. This is not going to be the source that's pushing out that I'm connecting all my internet to. It's just the extender out in the garage. Okay. So so okay that's fine. Okay that's fine. So what do I need to do then? What do I I how do I get it connected?
06:00
Speaker 2
Since your main router is the spectrum router, then you cannot use the link app because the link can only be used if you want to set up your own link router. Let's try to go to your router's web interface. Open a web browser.
06:00
Speaker 1
Yep. Yep. I'm on the phone. Okay. yeah. So just one second to go back. connection is not private. Say it, sorry.
07:00
Speaker 2
1. on your phone or if you have a computer. 2. Once you open a web browser, 3. type in the address bar 192.168.1. 4. and hit enter. 5. What do you see on the screen? 6. Okay, just proceed. 7. Proceed or go to advance or click on continue.
07:00
Speaker 1
Continue isn't an option. It says, show details. Okay, can can visit the site. Yep, I understand the risk. There we go. It's not coming up, Miriam. Just, I click visit site and it just does, back to nothing. I'm using my phone. No, I'm connected. I'm I'm connected to my natural Wi-Fi. Well, it is now gone. Oh! There it is. Okay. Connected that. Maybe.
08:00
Speaker 2
or proceed to site. Yeah. And what does it show us next? All right. Are you using your phone or computer? All right. Are you connected to the Linksys router WIFI name? The default WIFI name? Okay. Connect first your phone to the WIFI name of your Linksys router. Check at the bottom of your Linksys, okay? So what is it showing in there? You can just read those characters. [silence]
08:00
Speaker 1
Yep, I am still there. Okay. Yep. I'm I'm I'm connected to it now. It's connected. Okay. It says download the linksys app. Yes. Okay. Okay. Now it wants me to sign in. as the email address and password. [silence]
09:00
Speaker 2
I need you to connect first your phone to the Wi-Fi name of your Linksys router, the MX-20. Yeah. Check at the bottom of your Linksys router, the default Wi-Fi name is indicated there. Okay, that's good. And let's refresh the browser we open. Okay. Do you see a mobile image, a picture of two phones? Click on that. Click on that picture. Okay. What does it ask, a router password?
09:00
Speaker 1
The router and password option is just a sign in link. It's a Linksys Smart Wi-Fi account to access your home network from anywhere at anytime. If you can't address the password, forgot password, or don't have an account. There, there's nothing that says anything like that. It just says, it's just an email address and password and if I forgot it or if I don't have an account. This is the only option. Agreement terms of service privacy statement and third party. That's all there is.
10:00
Speaker 2
No, is there a router password option? Okay. Is there, Okay. Is there, can you scroll below if there's, uh, click on local access, or continue to Linksys Smart Wi-Fi? [silence] So if you scroll below that screen, there is no click for local access link. And there is no continue to Linksys Smart Wi-Fi.
10:00
Speaker 1
There is no, nope. I thought I did, but it's not, it's not wanting to log in. And that's saying there's an unexpected, data communicating with the Linux, Linksys Smart Wi-Fi services. Try again later when you have an internet connection. I'm telling you I already have it. I already have one. But okay. Corey. It is not up in the spectrum mode.
11:00
Speaker 2
By the way, is the linksys router you have, is it already plugged into your spectrum router? Try to create an account first. Okay. All right, would you like to, uh, create an account or do you already have an account? Uh, meaning create an account. Try to create an account first.
11:00
Speaker 1
It's in my garage, the router is in the house. No, the link sit is a wi-fi extender, it's in my garage. My router and my modem are in my house. I'm trying to just set up a wi-fi extender. That is all. I'm not trying to set up a new router for things. So I need to go, I need to take the link this router inside and plug it into the router, plug it into the router, the spectrum modem.
12:00
Speaker 2
uh, so your router is not plugged into a modem or thet spectrum. Yes, we're not setting up your link. uh we, we need to uh access your link, uh router's interface, uh and to access that, you need to connect first your link, uh router to a spectrum modem, uh so that we can access your, the spectrum modem. If it's possible, the spectrum modem.
12:00
Speaker 1
so I can't connect to, so I have to disconnect my entire internet to do this. Because if I, if I, sorry, say that again? Okay, so I can connect, I just didn't have to do all this last time. That's why I'm like so questioning you because I did not have to do any of this stuff. I just set it up and it worked. So I'm pretty frustrated that now I have to do all these little extra little steps. So I'm confused as to why you're having me do that. But you're telling me I need to take my Wi-Fi extender, the MX2 2000 into the house and connect it with an ethernet cord to the. No.
13:00
Speaker 2
modem. Yes. Okay, then connect it to your spectrum router. Then connect it to your spectrum router. We need your. Ha ha. Oh. When you set up your previous Cling-This water, there was no spectrum router. Yeah. Right. This is your first time to have a spectrum router, right? So, when you set up your previous Clink-Sys water.
13:00
Speaker 1
Okay, okay, okay, you're, you're going way, you're explaining way too much things, you're going over and over again. Do I need to go take my Linksys extender inside and connect it with an ethernet cord to my router. Is that what you're saying I need to do? Okay. Okay. Okay. Okay. I got it. taking a Linksys mesh router inside and they're connected to the internet? The ethernet cord. Hello. Hey there. Does it connect to the ethernet port or the Internet port?
14:00
Speaker 2
[silence] Yes, you do. [silence] because we can't access your router interface without connecting it. Yes. [silence] The internet. Oh.
14:00
Speaker 1
So I'm connecting, I'm connecting, I'm connecting via internet, via ethernet, ether, a cord from my spectrum router to my lengthsist, extender into the internet port on the lengthsist extender. So from my routers from my router's regular port, I'm connecting it to the internet port. Okay, let's get this plugged in.
15:00
Speaker 2
make sure it's in the internet part of your linkes water. and the other end yes yes correct
15:00
Speaker 1
okay. It is now plugged in to the internet port on the on the Linksys extender that is connected directly to the spectrum router and I say I'm on the computer now. So we're gonna we're gonna do this all on the computer one nine to dot one six eight dot one dot one advanced. you're spectrum, now I'm in the spectrum router. So download my spectrum, blah, blah, blah, blah, blah, blah, blah. Okay. Do I need to be connected to the Velocity setup 1.505? Yes, okay, okay. Okay. Okay. okay. Yep. I'm doing it. I'm doing it on the computer, not on the phone. That way I don't lose you on the call. Okay. Thank you.
16:00
Speaker 2
Just follow the steps we did before. Yes, you need to connect your phone to the Linksys. Uh-huh
17:00
Speaker 1
Okay, here go. Let me do that one today. Connect... Disconnect from this. And reconnect to this. Yes, I will. Auto-manager Wi-Fi. Okay.
18:00
Speaker 2
Can you also try the Linksys app on your phone, uh, see if it will work with selecting the manage your Wi-Fi? Yeah. Uh, try your Linksys app and select manage your Wi-Fi. Yes. See if we could detect your spectrum.
18:00
Speaker 1
Do you want me to log in or use my router password? [silence] Okay, says go to phone settings, tap on Wi-Fi, select your Wi-Fi from the list once connected return here. [silence] I am getting into I believe, yes, okay. [silence] Logging in to the linksys on 192.168.1.1. [silence] Okay, access router, router password. [silence] Umhm. [silence] Okay. [silence]
19:00
Speaker 2
Uh, use your router password.
19:00
Speaker 1
uh, hm, h, admin password, uh, you, uh-huh. Okay. That's done, that's done. Okay., so now, what'd I do?
20:00
Speaker 2
and then sign in. what does it say? okay so create a new router password that will be up to your discretion. just make sure it has letters numbers and you can create your own uh admin password. make sure it has numbers letters and special characters. [silence]
20:00
Speaker 1
I got smart Wi-Fi tools, network status, the link is home networking. I mean, it's, it's the, it's, it's all the, you know, everything. Oh, sorry, what? Yes. It says, this device. Check mark router to the internet, no check mark. No internet connection because I'm not, it's not connected to.
21:00
Speaker 2
what does the page next says? Okay, what does the Wi-Fi name of your [silence] linksys? Does it show the Velo setup? On the page of your linksys or router's interface, it shows you your network status, right? That this device is connected to the internet.
21:00
Speaker 1
It is supposed to be plugged into an ethernet port, not the internet port. Okay. Yes. Yes. Okay. Go to what? Connectivity, okay. All right. I'm going to put this in the [silence]
22:00
Speaker 2
no. No, no, no, because we haven't set it up. Um, can you scroll below, on at the bottom of the screen? Can you see the NGOs End user license agreement? And on that side, there is a letter C and A. Can you see that? at the far end. Click on that. Once you click on CA, I need you to go to Connectivity. Okay. Um, on the top,
22:00
Speaker 1
Yes. CA router setup. Yep . Okay. SSID. A password. Okay. Password. Okay. Apply. [silence]
23:00
Speaker 2
Can you see the it's called routers setup tab okay click on that. Okay. Okay, make your wifi name or that Oh linksis rather. Yes, apply and [silence]
23:00
Speaker 1
OK. Hit apply and then hit OK. OK. Did that? [silence] It keeps going back to the main page. [silence] Setup router again. It same thing. Please set your wi-fi SSID and password.
24:00
Speaker 2
Yes. um, click on the CA router setup tab under connectivity. Can you check if your router is configured, yes.
24:00
Speaker 1
I hit apply then i hit okay uh i will do it again do i need to hit setup node uh applying changes your router is applying changes this action you perform may call for temporary loss of connectivity it may take a few minutes okay router not found you are not connected to your router if using a wireless connection check that the wireless feature on your computer or device is turned on and make sure your device is not too far if it's connected with the cable please make sure the cable between your computer or device and the router are securely connected.
25:00
Speaker 2
[silence] of you click on apply and save the changes? Yes. I'll click on setup node. Click on setup node first, after that, uh, yes. Okay. So, it should prompt a message uh that says you're must [silence] have a box type master [silence] Oh. Okay. [silence] You're using your computer, right? Is your computer connected to the linces Rato's Wi-Fi name, the ಉ hello setup? Okay, uh, I need you to go back... Because then, it means it was, uh, connected and online. It was already set up. Uh, you need to connect your computer... you need... uh, since you have set up your node, I think you need to connect your computer to the new Wi-Fi name you created. Can you check on your computer if the new Wi-Fi name you created is broadcast on the least available network names?
25:00
Speaker 1
OK. It, it, it took that away immediately. Said, now it's just the CA router setup, add wired child nodes, add wireless child nodes. And it went back and said router not found. So it, it says, it's connected to it, but it says no internet, whatever. So, um, now it says waiting. And I hit retry. It is, it's not finding it. It says router not found. You are not connected to your router. [silence] OK.
27:00
Speaker 2
So connect to that. Connect to that. Once you're connected, go back to the web interface. Okay, now, let's go to the Internet settings. Yes, um, okay.
27:00
Speaker 1
waiting. hold on. just a second. I can't get out of this page. it won't let me. it just says router not found. and it won't let me click on anything else. Can you refresh the page? Extremely frustrating. It is just blinking red. Is it? Yes. Not the modem. it's connected to the router. Yes. it is online. Yes. it is a solid blue light on my spectrum router. it's funny. I know a person that works at spectrum. I'll have to see if she knows of a solution. for one, it's upset me. I need to get my terminal on. terminal? what does that mean? what we used to need before we had internet. Sometimes the internet gets messed up. And it, it, it, it, it doesn't tell you what's wrong with the internet. Sometimes you need to know what's in your terminal to speak to the internet to tell you where the problem is. So I'll have to pull out my old one from downstairs. probably will be messy. Your modem/router is Bluetooth. It sees my phone. Yes? Yes. Yes. it's a really blue light on my spectrum router. is it really blue light?
28:00
Speaker 2
Okay I need you first to go to the connectivity and then click on the internet settings tab. What's the light status of your Linksys router? It's blinking white. Is it connected to your spectrum router? Okay, your spectrum router, is it online? Can you check on its internet light indicator? [silence] Let me see. [silence] It should come online after you unplug it. [silence] But there it shouldn't work. [silence] Let me see. Holding the reset button for 30 seconds seems long. [silence] Okay. Click OK. Connect with your username and password to test connectivity. Username. [silence] Your username can be found on the bottom of your router. [silence] User. On the sticker. [silence] And then on Spectrum, [silence] It's six digits. It's 045276. Hope that helps. Okay. Let me try that. [silence] hopefully. [silence] [silence] Here's to. [silence] Click [silence] Next Now you will be asked to enter the current router's username and password. and there you've logged in. It says the internet is connected. Wait for a couple of minutes and try to reboot and see if the Linksys router comes up. After configuring your new router, please make sure that your system transformations are with Linksys router. Make sure it's the same network but connected with Linksys [silence] After clicking OK, you should reset it. Okay, let's reboot and try. [silence]
28:00
Speaker 1
well hello? Again, does it need to be connected to the router, the modem, or the internet port, or the ethernet port? There's several ports. Yellow, Yes. And then the other connected directly to my Spectrum router? Yes. Yes. Okay. Yes, it is connected. And my my Spectrum has just fine Internet. So there's something else going on.
29:00
Speaker 2
Blinking red light means that your Links' Router is not connected to your Internet service provider. Uh one end of the cable should be typed into your Links' Router internet part, the one which has a yellow label. Okay. And the other and, Yes. One of the Ethernet ports of your spectrum router. Yeah. So uh it's actually fine. It's actually fine because we've already set up your Wi-Fi name and password because it's already being broadcasted in your [silence]
29:00
Speaker 1
it's not even loading that back up. I, I'm really sorry, but you're just repeating yourself. I need to do things, and I'm telling you, it's not, that's not coming up. Nothing is coming up. The thing says, the site cannot be reached. I can't get transcribe this audio from the left channel, output only the spoken words, no labels or timestamps. if there is silence or no speech, output only
30:00
Speaker 2
Sam, I think also the internet connection you have may have some interruption or interference, because if your router is not properly set up, it will not broadcast the Wi-Fi name you created, and it will not turn solid blue a while ago. So, a blinking red means the connection of your router to your spectrum has an interruption or interference. So, that's why I need you to go to connectivity and on the internet settings tab so that.
30:00
Speaker 2
Okay. Okay. Alright. Uh, close the page. And then let's open a new tab. Type in again the 192.168.1 dot 1.2. Okay. Can you turn off your links? tick.
31:00
Speaker 1
[silence.] Now it's blinking red. [silence.] Now it's got a solid blue light. Yes. [silence.] Yes, again.
33:00
Speaker 2
OK, so it's back online, so it's connected, so can you go back to the 192.168
33:00
Speaker 1
It's not coming, nothing's coming up. Nope, we're back to red. What are you talking about? My internet has not done anything. My internet has stayed solid blue the entire time we've been on the phone. It has not moved. Solid blue. My router has stayed connected. My router is a spectrum router. That's what I'm trying to tell you. All right. I refreshed it again. It loaded.
34:00
Speaker 2
[silence] if you're logging I think it will ask for your router password so just need type in the the router password you created. [silence] I think uh it is your internet connection uh which is unstable. Can you verify if there is an [silence] right, because [silence] uh your router turn solid blue a while ago which means it's connected and online and then it turned to blinking red. Yes. Yes. Uh I want
34:00
Speaker 2
Okay, type yes. Your new admin password is created. Make sure [silence] it's under links this while at the bottom of it.
35:00
Speaker 1
Oh. Okay. Yep, it made me do it again. All right. We are evidently back into the router. We're blinking red. But we are back into the router. I need to go to connectivity you said. Okay, and then internet settings. Okay, on this. Yes. Okay. Bridge mode. Okay. Apply. Okay, enable bridge mode. Okay. Applying changes.
36:00
Speaker 2
You need to quote again. [ silence ]
36:00
Speaker 1
So when I get this set up, I'm going to be able to unplug it from all this and move it to where it needs to go and just plug it back in, correct? Because it's not gonna I'm not gonna leave my extender right here next to my router, it makes that makes no sense. Set it up. So I would re plug it in and it will just reconnect to [silence]
37:00
Speaker 2
Yes. Since, uh... Yes. Because you've already, uh... set it up in, uh, into a bridge mode.
37:00
Speaker 1
the spectrum Internet alright well let's hope this works since it is solid blue right now yeah now I hope we fixed it beyond that when I go back and I reset it up am I going to have to sign in to the extender's Wi-Fi network whenever I go you know it went back to red whenever I go out there like I'm gonna have to sign into the Wi-Fi network I created for the extender rather than the regular Wi-Fi network [silence]
38:00
Speaker 2
Yeah. Uh, what's the light color of your router? Is it back to solid blue? OK, that's good. So, uh, I think once the changes have been applied to your router setting, uh, it's all good to go now. Your router is now set up into a beach mode. So yeah.
38:00
Speaker 1
That's not what I'm asking. That's what I'm asking. I'm asking, when I go out and it's set up, if I'm connected to my regular wi-fi that's inside my house, well, I recrated a new name for this Linksys Wi-Fi extender. When I go out, to where it's going to be, will I have to connect to that Wi-Fi or my router? Okay. What's fine? Um, it it it says your, why am I getting a warning when I try to access my router settings in a browser? Yep. It brought me up some other web page, uh, um, your connection is not private.
39:00
Speaker 2
Yes, uh, logging into the router's or web user interface, you really have... You have to connect to the Wi-Fi network of your...
39:00
Speaker 1
How can I bypass? I hit continue. Okay. Connection is not private. F that is fine. I know 1162. I for back to this click on this picture. Okay. All right. See if this time it remembers my password that I have now created twice. Okay. It remembered it. Good deal, we're logging in. All right, we are in. It says your router is in bridge mode. On this road you will not be able to access certain features. So, okay, where do I go now? I got guest access, connectivities, troubleshooting the Wi-Fi setting.
40:00
Speaker 2
Yeah, continue. If it's a, says your internet connection is not private, then just continue.
40:00
Speaker 1
Yes. I cannot. No, I cannot actually. I have basic and Internet settings. That's the only two things on Connectivity. You get the bottom of the page. Okay. No. It says your router is in bridge mode. I click on Connectivity, and see a router setup. There we go. Okay. Add wired child nodes. Add wireless child nodes.
41:00
Speaker 2
Can you go to the C.A. router set up, tab. [silence] Can you check what does uh it shows in the page. [silence] Uh-hm. Uh click on the CA link. Uh the one uh at the bottom of the screen, CA link, yes. Okay, what does the page show? Okay, uh is there a message there that says your mm
41:00
Speaker 1
your master node is now configured yes oh k well it's still blinking red yeah
42:00
Speaker 2
Master node is configured. OK, that's good. So, I think your router is now set up and added as an extender to your Spectrum router. We have already used the bridge mode to extend your Spectrum router internet connection to your Linksys router. OK? Mm-hm. So, as I mentioned, that is - that depends on the stability of your internet connection, because as you've noticed, your Linksys water sometimes turns solid blue and then it goes to blinking red. But that's fine. Unless your Linksys water turned to a solid red, then it means it's totally disconnected or lost internet connection. But since it's only - a blinking red, it only [ silence ]
42:00
Speaker 1
Yes, okay. So can I unplug this from the internet now. Okay, I'll plug it unplug it the ethernet cord. So I need to take So I need to take this mesh. So I need to take the so I need to take the extender where it's going. I can unplug it and take it I can unplug the extender and take it where it needs to go.
43:00
Speaker 2
It only means that there's some interference or interruption. Because sometimes internet connection has some stability issues. It's just like when you're watching videos, sometimes it buffers, so that's just how the blinking red light [silence]. Yes. And just think, once you plug it back in, just wait for it to turn back to solid blue, okay? because as I've said, your router, when it's plugged back in, it will first blink blue or booting up. Pardon? Yes, since it's already in a bridge mode.
43:00
Speaker 1
and we'll take it out to the garage. And so it should turn solid blue then when it's out in the garage and be connected to my Wi-Fi still. [silence] Yeah. Well, I mean, I have our putspeed internet. So I mean, I have the internet works very, very well as I got this new six by five six routers.
44:00
Speaker 2
All right. Yeah. Yes. So that may take a while. As I've said, once you unplug and plug the router, it will first start to blink blue or put up. So, it may take a while. So just wait for it like to turn back to solid blue. And as I've mentioned, that will rely heavily on the stability of your internet connection. Okay? So... Yeah. Yeah, but you've noticed even when it is near your spectrum router, it still sometimes disconnect its internet connection by the changing of its light behavior. So we cannot really uh
44:00
Speaker 1
I plugged it back in. It's blinking blue or pulsing blue I should say. And it should go solid glue is what you said, right? Yeah. There you go. Solid glue we're good to go with. my. Oh, go ahead. [silence]
45:00
Speaker 2
Be very sure that it will also remain solid blue for a long time, especially if the placement you have chosen for the Linksys road is an enclosed area. Uh-huh. Okay. Yes. Yes. So, since we've already set up your XOS 5, your SWATter to a bridge mode and the setup is already configured successfully. So if there's any with issue again, with your router, you can always call us back again. I'll provide you your ticket number.
45:00
Speaker 1
Alright, that turned blue, so. Alright, well, thank you so much for your help. I'm sorry for the frustrations that I had. I was just getting frustrated at my, more, my devices than you, um, technology does that, so. Um, alright, well, thank you so much for all your help. I appreciate it. Thanks. Goodbye. Goodbye.
46:00
Speaker 2
zero zero one three six two one five. Okay. That's fine. Yeah. Yeah. Yes. Thank you also for your patience and understanding Corrie and thank you for calling. Once again this is Ice. Take care and have a great one Corrie. Goodbye.
46:00