Speaker 1
This is Linksys technical support calling. This call is recorded for quality assurance. Please hold as we connect you to a Linksys specialist. Hello. Hmm. Okay. Um, the parent right now the parent node is all blue again, right? Okay, and how about the child node? Okay, can I turn it on please? Uh my both of sir. Hmm. Okay. Just just wait.
00:00
Speaker 2
[silence]. [silence]. [silence]. I see you got the lights to flash blue. blinking blue. Solid red.
00:00
Speaker 1
it's solid red. Okay. So you're on your iPad right now. Okay. You have the router not found, the linksys page, right? Okay. All right. Mm-hmm. Yes. Is it router not... Mm... they have the link to Linksys Smart Wi-Fi page? I know. The one that we opened earlier. Okay.
02:00
Speaker 2
Uh, they're blanking again. Uh-huh. Hold on a second. OK, so I'm on the page. This page, MyRouter.local/ MyRouter.local/ local? Uh-huh. OK. I have a, uh, is that an app or is that? That's not an app. OK. Yeah. So I have that. So now it says no Internet connection on the, on the iPad. So now I have to go offline. The on the iPad, it said that there was no more connectivity on the, on the iPad.
02:00
Speaker 1
um okay can you go back to settings um go back to settings and then Wi-Fi and then is it connected to the links as a the BELLOP setup or is it connected to the Eero? Mm hmm yeah, it should be on the Velop. Okay. So, it's connected now. The iPad is back to the connected to the Velop setup. So, can you close this um settings page and I need to go on to um the Safari again?
03:00
Speaker 2
It just flipped a no internet connection, poom. Uh, the hero is not there, but it may be trying to connect. We wanted to connect to the Velop, right? Yes. So that's okay. Now it's under, now I selected Velop. So I think the lynx is is connected. Yes. Um, Carla, let me, uh,
03:00
Speaker 1
yes [silence] uh-huh [silence] yeah that's okay sir, because um your router is a um [silence] uh let me double check if it is a dual band or a tri band [silence] yeah, it's tri band. so [silence] definitely it will broadcast two networks [silence] or three networks. [silence] um so [silence] your ipad can detect um two bands. it can support 5 and 2.4. [silence] that's why it has two um they will both set up, okay? [silence] so you can just use either of these two [silence] uh two names, but they will have the same wi-fi password, okay? [silence] so next is um let's go back to
04:00
Speaker 2
You mentioned. Uh, this is VL op set up 5 AC. Other networks, I see something called VL Op set up 2 BE. And I think I saw 2 BE on the box or something. Okay. Okay. I. Try I think. Okay. Okay. Yeah. Okay. So I use it.[silence]
04:00
Speaker 1
safari and you still have that linked to smart Wi-Fi ok by the way double check again the child node is it still blinking red ok kindly click on troubleshooting uh [silence] after you click on troubleshooting under troopshooting you have the status and then right below status you have devices and then report kindly click on report and then when you click on report what is the firmware version
05:00
Speaker 2
OK, I'm there. So, yes I do, smart wifi, tools and it says OK. Yes. That's done. OK. The firmware is 1.0.4.2035
05:00
Speaker 1
203508, right? Let me just check. [silence] okay. so it seems like we need to do a firmware update right now sir because it's not on the latest might be this the reason why the child is not connecting. [silence] so uh, but before that can you scroll down a bit sir and look for an information about um internet connection IPV4? look for IP address. [silence] okay. and then, so let's do the upgrade.
06:00
Speaker 2
9 8. 1 6 9 1 2 2 2 5 2 Right okay. The internet address is 9 8. 1 6 9. 1 2 2. 2 5 2.
06:00
Speaker 1
Click on, OK, to close the page and then go back to connectivity connect. Under connectivity, on the left, right side you have firmware updates. Okay? Can you see that? It shows us there is an update available. Click okay. Click on update firmware. Then let's wait until the update. If there's a possibility certain during the update, it will reboot the router. So that means um we might be disconnected. Again, if we get disconnected, I will call you back. Okay? [silence]
07:00
Speaker 2
That's done. Connectivity. Connectivity. Okay, that's done. Yes. Yes. Okay. Yes. Okay. Yeah. Okay.
07:00
Speaker 1
It's still not updating? Oh, it's still downloading, right? Okay. Wait for that. okay, it's still booting up. I said I'm downloading. okay. okay, let's just wait for that sir. hmm, not yet.
08:00
Speaker 2
Your router is rebooting, and then I have a. I have a. to select the okay, I think. K, click the okay. K. No, it says, um, your router is rebooting and then it has a big uh okay. That's I think I have to hit the [...]
09:00
Speaker 1
okay, you can you click OK now? Mm hmm. Okay. Okay. Do two child notes right now, it's still, um, solid as it's a blanking red. Okay. [silence]
11:00
Speaker 2
Okay. Yeah. Okay. So it says, it's waiting. So it's waiting. So it's thinking. Spinning. Blinking red. Red, flashing. It's blinking red, right? No. Wait. It's waiting. Spinning. [silence] So it's still waiting and spinning. [silence]
11:00
Speaker 1
All right, so it's still loading. The light on the Parrot Knowledge just followed, right?
13:00
Speaker 2
[silence] still it still says waiting
13:00
Speaker 1
Sir, can you turn off again the two child nodes? Hold on. Hold on, sir. Not yet, sir. Let me just double check this. Okay. Okay. Can we turn it on? Let's do nodes. And then on your iPad.
14:00
Speaker 2
Let me look. Yes. And the, uh, the two child nodes are still blinking red. Uh-huh. Okay. Okay. Okay. Okay. Okay. Okay, that's done. [silence]
14:00
Speaker 1
Um, can you double check if is still connected to develop setup? You have to like, um, just close, just minimize this page and then go back to settings again and then Wi-Fi. Huh. Okay. Select, um, LAN sets again velocity,uh
15:00
Speaker 2
uh-huh. Let me see. How do I do that? Tell me how to do that. Okay. When the settings, why? If you know I see that it's spinning on the uh on the EO. Uh it's spinning. And I don't know that the uh I don't know that the VLOP is the link system selected. It's spinning on the uh on the the arrow. Maybe I need to select uh link this again. Okay, that's done.
15:00
Speaker 1
Okay. Okay. Let's go back to the, um, page the Safari. And then after that, um, it is still waiting. And no other, uh, uh-huh. What options do you have on Safari right now? This option like okay, refresh. Um, on the, um, you have there opened the Safari page right? Oh, you're not back on can.
16:00
Speaker 2
So now it's connecting. Now it's connected. OK. So I'm still waiting. So maybe it will update the parent node now. Say again please? Yes. And I'm looking at connectivity right now. Connectivity is way [silence]
16:00
Speaker 1
"Connectivity." Mhm. "Can you click anything like apply?" [silence] Okay. "Can you click on refresh, on this page." [silence] Again. "Then visit this, yes." [silence] And the password again. "Tap on the two-image or the image of the phone." [silence] Okay.
17:00
Speaker 2
Reading... Silence. Yes. Silence. Let me see...silence...let me see... Silence. No, it stuck in the waiting mode. Silence. It locked in that. Silence. Can't get out. Silence. Uh... Silence. Okay. This connection is not private. Show details or go back. Silence. Okay. Go back. Silence. Okay. Now in, visit this website, and then visit website. Silence. Okay. So... Silence. Um... The image of the phone... Silence. Okay, I don not have that right now because it's back on connectivity. Silence. And it says, you are... Silence. Nodes are up to date. Silence.
17:00
Speaker 1
Okay, good. So Kelly, go back to, uh, click on apply, and then okay. And then go to troubleshooting again. Yes, troubleshooting. And then after troubleshooting, go back to report. Right below status. Mm-hmm. And then check firmware again. Okay, that's good. It's on the latest firmware now. Kindly check. Sure, I'll kindly turn on now the node, the child nodes.
18:00
Speaker 2
a i Okay. Okay. So then I went back to the main page. troubleshooting. Okay. report. report. report. report. Report. It is very small. Okay, I'm there. The firmware is 1.0.13.216. Okay. [silence]
18:00
Speaker 1
[silence] yes let's and give it a while to connect yeah we're connecting both okay [silence] Mhm hmm hmm it's a blinking red now
19:00
Speaker 2
Yes, I'm fine. No problem. No. Just that. Okay.
19:00
Speaker 1
Again, if the child nodes right now will be not connecting, it will stay to blinking red. We might need to do a rest on the nodes and then reconnect it later again to the network, okay
20:00
Speaker 2
it blinking red uh, huh. Okay. Blinking red still
20:00
Speaker 1
Okay, so same blinking red. Okay, sir, we'll do a reset on the child node, finally. Um, on each child node, sir, we need to uh reset it for 20 seconds. So, all you need to do, um, we'll not include the parent node, just the child node, okay? Just the two child nodes. Okay, so we'll go ahead and reset the two child nodes.
21:00
Speaker 2
Yes. Okay. Mm-Hmm. Correct.
21:00
Speaker 1
Um press and hold the reset button for 20 seconds each node 20 seconds each node okay. Okay so let's try the other one okay.
22:00
Speaker 2
OK. OK. OK. [silence] OK. OK. OK. There's one. And I'll do the other one.
22:00
Speaker 1
Okay, good. Let's wait until all the lights turn purple. Okay. Okay, the other one's still booting up, right? Okay, let's just wait until the other one.
23:00
Speaker 2
there's the second one okay so there like the blue purple okay one purple yes
23:00
Speaker 1
It turns purple. Okay, both. Okay, good. So, on your iPad, sir, you're not under troubleshooting, right? Okay, can you click okay to close troubleshooting? And then, kind of click on connectivity again. And then, can you check if you have the option for router set up? Yes, can you click on that section? And then click again on add wireless.
24:00
Speaker 2
Okay. Purple. Both are purple now. Yes. I'm shooting. Let's see on the iPad. I am under Troubleshooting. Okay. That's closed. Yes, that's done. Yes, I see CA router set up. Okay. That's done.
24:00
Speaker 1
Less child nodes. Uh-huh. Uh-huh. Then do not click anything. Do not click anything in that page. Then click then on or check the two child nodes. Uh-huh. Uh-huh. Uh-huh. Uh-huh. All right, let's just wait. [silence]
25:00
Speaker 2
Okay. That's done. Okay. So I didn't do anything, so it flipped it. So, I didn't do anything but I touched the wireless chow nodes and they are now flashing, once flashing red and the other one is flashing. They're both flashing red now. Okay. [silence]
25:00
Speaker 1
Okay. So let's just wait for the other one. Mhm.
27:00
Speaker 2
Okay, Carla, one of them has turned blue. Okay. So I think the one that's online.
27:00
Speaker 1
Let's wait for it to start. Let's observe if it will stay blue. Let's wait for the other one.
28:00
Speaker 2
Okay. And so the other one has now changed. Now the other one's blue.
28:00
Speaker 1
Is it still blinking red? The other one. Okay. okay. Mm-hmm. Let's wait for another minute, sir. Just to make sure that the light is stays blue. That means it's stable. Um, sir, do you want to change the network name from Vallop to a different name? Or do you want to um just use the Vallop setup?
29:00
Speaker 2
no, they're both solid blue now. they look like they're connected. they look like they're connected. okay. sure, sure. okay. um, let's see. I thought, oh, I don't know. Let's see. What I had before for my Wi- Fi was I had, so, pass word like, this not. I'm
29:00
Speaker 1
Some, some of them, sure, will change the name so that they can identify the name like they can really see that that's their name and then they also create a password. Uh-huh. Hello, sir. Okay
30:00
Speaker 2
Oh, I don't know Carla. So, what do you suggest? Which is better? Id like to do that. Yes. Okay. So. So. So. So. So. So. So. So. I'm looking. I think I I think I have a username and password from before.
30:00
Speaker 1
This for the account sir for your for the cloud account and again so I mentioned earlier that this type of router that you have it's no longer supported with the cloud. So we'll change that on your iPad right now. What page do you have? Is it troubleshooting? Okay can you close click apply sir I'm sorry click first on done adding child node. Yes. Is the done adding child node? Is it grayed out or clickable?
31:00
Speaker 2
Oh. Okay. So, I'd like to change it, I think. Um, what things do I have? Uh, uh, publishing. I have, I have connectivity. Well, I clicked apply. Okay, so, I, uh, it is, it's clickable.
31:00
Speaker 1
Okay, now click answer. Click on done adding child note. And then you click OK. Yes, and then click on OK to close the page. And then click on Wi-Fi, Wi-Fi settings, Wi-Fi settings on the left side. Okay, when you click on Wi-Fi settings, you consider the 2.4, the 5 Gigahertz, right? And what is it, 6, the other one? Or is that the 5G, Z2? Okay, so this time, sir, you may now change the name for the 2.4 and the 5 Gigahertz and then for the Wi-Fi password.
32:00
Speaker 2
Okay. That's done. That's done. That's done. Okay. Why? It's. All right. Okay. Okay. That's done. Yes. Yes. Um. It's fight.
32:00
Speaker 1
You can use the same password for all the bands, okay? But for the name, you can change it the name that you like. You can just put the name and then you can put 2.4 and then the other one is you can put G and a 5 so that you will identify you can identify that is for the 2.4 and that is the other one is for the G band, uh for the 5 radder. You can put 5 for the 5 gigahertz. Alright? Yes. Yes. You can put five or five g-hz. Yes. [silence] You can use the same password for both bands, or for the other bands as well. Yeah, it's up to you, sir. On how you created your password. As long as you can remember, because you will be, uh, after this, uh you have to, um after you changing it, you have to reconnect back to the network, okay? Using the new name and the new password. Okay? [silence] [silence] [silence] [silence]
33:00
Speaker 2
and then the password is, yeah. So then, uh, upper case lower case number. Okay. Okay. Okay. Okay. Let me do that now. I have a question. I have a question. So my question is see I'm gonna put in a new user name Wi-Fi name. a name[silence]
34:00
Speaker 1
Let me know once you're done typing the name and the password so that I can give you the next instructions. Okay? Yes.
35:00
Speaker 2
Okay. Okay. Can I make the name two words? That's it? Okay. Okay. Here's one. And the other one. And then password. [silence] Okay. okay 2.4 and I need to put the password on each one of these do I?
35:00
Speaker 1
can just change the name so that you can identify it. okay. yes. You can yes you can change that name. yes. yes that will be okay. Yes, you can keep this.
37:00
Speaker 2
Got it. Okay. Yeah, I did that. Yeah, you mentioned. Okay. Okay. So, I got new usernames. Now, on the, sorry, on the last one, on the 5 point the 5-point gigahertz number two, uh, could you change that? I'll change that name too. That, that. Now, can they all, so say again, can they all be the same name or should they, at the end, have 2.4 and 5 and 5? [silence] if it's the same name.
37:00
Speaker 1
Same name, but you can just again put 2.455. Uh huh. Uh huh, OK.
38:00
Speaker 2
[silence] right okay [silence] um I'll change. Let me check it. Okay. So I got new passwords, uh I mean I got user names, file name. Uh ends in uh five. Oh wait a minute. One second, one second. One change here. [silence]
38:00
Speaker 1
and then I'll call you back after maybe around three to five minutes again okay or three minutes okay to continue all right all right so just click on up yes so the new name yes correct all right okay yes go ahead is that an unmanageable switch or what is that okay
40:00
Speaker 2
OK. OK. And um, I want, yeah, one, OK. OK, so go back into settings and then and reconnect under the, under the new name. OK. OK. I think I got it. So I have a question, Carla. So, can I. Can I take to remove the ethernet cable from the modem and plug it into the switch? I managed the switch. No, it's, I don't know. You know, I don't know the answer, but I, but the the other link says I had connected it into the switch. [ silence ]
40:00
Speaker 1
Okay, it's like the modem to the, to the, to the modem to the switch, and then from the modem to the switch to the router, huh? You can try that as well, sir. You can try that. Okay. Yes, we can do that.
41:00
Speaker 2
The reason I like it in the switch- The reason I like it in the switch is because lights, music and cameras and other things come off the switch. The modem, uh the modem is well, the switch is connected to the modem and the and the the V is connected to the switch. V's connected to the switch and the switch is connected to the modem. Okay. Okay. Okay. Okay. So, um, so, um, And then, I can take the I can take the child unaids and place them around the house and they'll come back on and they'll come
41:00
Speaker 1
yes. we'll do that later. after we save the settings on your Wi-Fi, so, after we um, if we change the settings after you click on apply or um, since our call will be disconnected, all you need to do then is connect the switch so that um, when I call you back the switch are already connected. okay. alright. You're welcome. So, you may now um, click on apply and then, yes, and then I'll call you back within after three to 5 minutes after you've kind of connecting all the devices. Okay. All right. You're welcome. So, just stay on for 3 to 5 minutes, sir. After 3 to 5 minutes, okay. Yeah, you may now click on apply. to apply the new settings. Okay. [silence]
42:00
Speaker 2
Okay. Okay. Well, thank you. Thank you Collin. Let's have a go. Okay. I can't apply. Okay. Okay. Okay. Okay. Correct. Okay, thank you. Let's see. Okay. Okay. Okay. Yes. And then it says, you're updating these, uh, the two points of
42:00
Speaker 1
Yes and then it will just give you the confirmation what is the new settings that you set up. You click on ok then to save. Um yes. Yes. Yes m. Okay, saving the settings. Now. Okay. Can I go back to go back to go back now to settings to say. to say on your phone. [silence] okay, go back to your phone. on your phone, go to Settings and then uh Wi-fi. [silence] you may reconnect to either um either the names which one you'd like to? [silence] um, I'll record this to use. Yeah. Um for the 2.4, it's like um more on a
43:00
Speaker 2
to try and it doesn't want to let me go back to settings on my phone. Let me go to the phone. I was on this. I was on the iPad. Okay. Okay. Yes, and then select. Okay. or then select one of the okay so it shows it shows it shows five and five and it shows a 2.5 and 5 and 2.4. Which is better? 2.4 or 5? 2.4 is longer.
45:00
Speaker 1
like wider range but a bit of slower speed but with the um with the 5, it's like more a um faster speed but the um range is not that good it's just a um hmm if you're just I think you can just go to 5 sure you have better speed okay good how about your iPad you may now um reconnect your iPad as well :) Mm hmm. Uh huh. Okay. Yeah, just minimize the space or you can just minimize this then you go to settings. Mm hmm. Uh, then Wi-Fi. Mm hmm. Yes.
46:00
Speaker 2
So now I have a blue screen and I am at the my router.local page. Maybe so I don't see where to go. Okay. Okay. Settings. Okay. And then pick the uh Wi-Fi. Yes, I'm at Wi-Fi. So, okay. And pick the um, okay. So I'm at Wi-Fi and then so I'll see the network.
47:00
Speaker 1
Mm-hmm. Mm-hmm. Mm-hmm. Check the child nodes, the show's still blue. Okay. Okay. Cal tech sur, if you can access the Internet on both phones and iPad, just to make sure. [silence]
48:00
Speaker 2
[silence] It has the here and there. So I want to select the five. So I did Balmoral, here the five. Okay, so that's that looks like that's done. Okay. Blue, still blue. They're both still blue. Yeah, okay. Okay.
48:00
Speaker 1
it ok uh huh ok good okay good so again sir your switch will be connected to modems to linksys then linksys to switch right uh huh uh huh
49:00
Speaker 2
Um... [silence] the iPad is online. It's let me check. [silence] Okay. The phone is online and the iPad is online. [silence] Let me let me look at it. [silence] Uh because I have other things on the switch, which I think. So I would connect. [silence]
49:00
Speaker 1
Mm-hmm. Okay. Right? I think that will be from the linking system to the switch.
50:00
Speaker 2
I would connect, let me go slow here now. We would go we would go from from, uh from the lynxest to the switch. and from the switch, hold on a second, from the switch to the modem. Let me look here really carefully. Let me look really carefully. So, I would go from in there. it would go from the lynxst to the, [silence]
50:00
Speaker 1
that is which yes that's it yes yes yes so that again so that's from the modem to the internet port of your linksys and then there will be um vacant port there that's from your linksys going to the switch okay from one of the uh Ethernet port of this of the linksys to the states
51:00
Speaker 2
Yes, ok. Wait a minute. Would you say that again? Register to the: dreams is to the link.
51:00
Speaker 1
Okay. Yes. Yes. So that means there are two ethernet cables plugged into your Linksys, okay? Okay. Yes. Okay, you may now connect the switch and then after that, you can now relocate the two child nodes. Okay.
52:00
Speaker 2
Okay, um, from the, yes. Yes, that's correct. And then there's another one. Okay. And then the other one goes from the linksys to the modem. Does that sound right? That's correct. That's correct. One of them goes to the modem and one of them goes to the switch. Okay. Okay. Okay, thank you.
52:00
Speaker 1
Then you may now check the devices connected to the switch, if they are able to connect, now to the internet or to the network. Mm-hmm, mm-hmm. Yes. Yes. Mm-hmm. Internet on the devices connected to the switch. What are the devices connected to
53:00
Speaker 2
okay okay. So I connected one Ethernet port on the Linksys to the switch. And then the other one goes from the Linksys Ethernet to the modem. Okay, let me see if I have internet. uh okay, I didn't understand it. Let's see. So, I was good.
53:00
Speaker 1
Switch. Uh huh. Uh huh. Okay, can I try if they're all working? Yes. Switch. Okay, no problem. Thanks. Let's check.
54:00
Speaker 2
[silence] music and lights. [silence] and [silence] there's a [silence] there's a cell tower booster that's connected and there's uh [silence] you know music. [silence] okay. [silence] can I check and see if there's internet on my computer? because the computer goes into that [silence] yeah the computer goes into that [silence] the computer goes into that switch. [silence] All right. So it looks like my cell phone connects.
54:00
Speaker 1
It's not connected. Is the switch on right now, sir? please. Please double check if the switch is on. It's not online. It's working. Okay. [silence]
58:00
Speaker 2
"the computer, let me, let me check, here's a cable that goes from here, goes into the computer. So the computer is running off of it. Well, I think it was unplugged. Let me just maybe, yeah, let me check that. Yeah, the switch is on. So it was maybe, any spot in the computer again? No, no, let me check. I know it's working now. It wasn't plugged in completely. Yeah, it's working." [silence]
58:00
Speaker 1
run on the nodes nearest to the parent node. Then, next is the farthest node. Like, we're going to, like, the sequence, okay? So, uh-huh, mm-hmm. Yeah. And then when you turn on, first the location, which is, like, much nearer to the parent node, hmm, mm-hmm. Mm-hmm. It's still starting. Wait for like, let's wait for like another two minutes. The or it let's give the device to like boot up. Okay? Mm-hmm. Um, yes. Mm-hmm. Mm-hmm. How far this location from the parents, sir?
60:00
Speaker 2
Okay, that was there, and it's...it's...it's blue, so it's good. So then... Um, okay. Okay. So we have that one like two minutes? Okay. So, I think I go... Two... Nicely placed. Probably 40, 40.
61:00
Speaker 1
Okay. Between the first child and the second child? Or just the second child to the two parent? Uh-huh. Okay.
62:00
Speaker 2
feet. Well the next one is about 55 feet. Well I would say parent to first child is about 40 feet. And then I have the other child to place. maybe another 40 feet. maybe another 40 feet. and later another 40 feet.
62:00
Speaker 1
Yeah, you can. [silence] [silence] [silence] [silence] Okay. So what's on the light right now? Is it like still red or is it now blue? Okay. All right, it's now blue. So [silence]
63:00
Speaker 2
I can move them if the signal is not strong enough, right? I think the first child is gonna stay there. It's the second child I might move around. And, you know, signal. So, the house is three levels. So, parent is, is up three level, number three. Child number one is on level number two. And then I think child number two would go maybe another level down. No, it was blue! Let me look. The first child.
63:00
Speaker 1
It's blue? Okay, let's just go now to the, move now the, the second one.
64:00
Speaker 2
Yes. Yes. Yes. Okay. Over. Say, probably. Stop the outside. Maybe. here, maybe here. Yes, we'll put this one here. Okay, so that's blue. I'll go buy the greens.
64:00
Speaker 1
Yes sir, so after you re locate the second node, just wait it until it turns blue, then that's good to go then, okay. Alright, so is there anything else sir? Okay you are welcome. Thank you also for patiently cooperating with the troubleshooting, sir, okay. And let me just verify your email, okay. Let me just verify again your email address. That's M-U-L-L-I-N-S-U-S-A Yahoo.com right? Okay, that's good. So if you need assistance again in the future, sir, just give us a call, okay. And you may also
65:00
Speaker 2
I think it should be good. Okay. Okay. Well, it's blue. No, I thank you, Carla. You're great. You're really very good. I thank you very, very much. I could have, I would have... Oh, I'm happy. I'm happy. Uh-huh. That's that's correct. Well, I thank you, Carla. I mean... [silence] I'm happy. I should be... [silence] It's okay. [silence]
65:00
Speaker 1
Welcome sir. You may also visit our website at support.lences.com. Okay? Okay. Go ahead it will scan the network, which has its which node he can the node can connect, [ silence ]
66:00
Speaker 2
Mm-hmm. Okay. Okay, give me a second, Carla. The mode number two, the mode number two is flashing red. Sure. Okay. It'll connect. Yes. Back to- Does it go back to number one? I mean, does it go to channel one and okay. Uh-huh. Okay. Okay. Okay. Okay. Uh-huh. So it's flashing red. I think probably looking to connect.
66:00
Speaker 1
mhm =mhm all right =all right =mhm =mhm is it working? =all right =so
67:00
Speaker 2
Okay. So it's now blue. Oh, red again. Okay. Blue again. Okay. Well, okay. Now it's flashing blue. Okay. Let's make sure this stays blue. Solid blue. Solid blue. So, I think it's working. Solid blue. I think it's, yeah. I think it's working now. and [] and go. Thank you. Thank you. and you too. Okay. and bye bye. ,
67:00